Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It's discreet and does not have LED indicators or key fobs and is concealed in the wiring of the vehicle.
It also allows users to turn off the system temporarily by using Transport Mode to use it when they are renting their vehicle. This guide will take you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code that you choose. It is not detected by thieves using diagnostic scanners or other advanced methods. It cannot be disabled using circuit cuts.
The system is easy to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm system to complete your vehicle's protection package.
First, the installer must disconnect the battery to prevent accidental airbag deployment or short circuits. After that the installer is able to safely begin work. Basic hand tools are useful for securing connections with precision, while a multimeter can be used to verify the electrical properties and safety. Cable tie and insulation tape are essential to protect connections and keep wiring neat. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is important to choose the right grounding spot that is free of paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H & the CAN L are connected to the correct ECU ports. Depending on the model, these wires could need to be soldered or plugged into. A quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the customer once the installation is completed. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times over 2 seconds. After this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent out their vehicles frequently through platforms like Turo. An immobiliser can cut down on insurance rates, as it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch ignition device in order to guard your car from thieves. The device stops your car from starting if someone steals or copies your key. It's possible due to its advanced technology that stops the engine from starting until the right PIN code is entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you know which makes it impossible for anyone else to start your car. This is the most secure security system to protect your pride and joy, keeping its value intact when you want to sell it in the future.
Installing a ghost ignition is a simple process, but it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you must locate and identify a constant 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to prevent electrical short circuits.
After the wires have been connected, you are able to reconnect the battery and turn on the engine to test the function of the immobiliser. Once you have verified that everything is working correctly, you can install the immobiliser in a safe place inside the vehicle. Be sure to hide it in a secure manner so that a thief cannot get it into a compromising position.
Continue Reading has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car burglars. It is invulnerable to hacking and key cloning and is not able to be disabled without the code. The device is also simple to use and can be set into an auto valet mode so that your vehicle is not activated when you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.
The system is also inaccessible by thieves using diagnostic scanning tools. This is due to the fact that it doesn't send and receive radio frequency signals and it utilizes the CAN data format to communicate with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. After this, you can start your vehicle and leave safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against key cloning or hacking while also protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to give your vehicle to service or valet park.
To complete a Ghost Immobiliser installation, you'll need identify a source of constant power (12V) and a grounding point. Make sure that both are well-insulated and able to be touched. It's also recommended to use cable ties to tie and secure the wires. This will reduce the risk of tampering by potential thieves. Make sure you check the exact location of these points to avoid mistakes, and mark them with an adhesive or label. It's important to check all connections for signs wear and tear. Connections that are loose can cause problems with the system, so be certain that they are securely in place and properly insulated. Finally, don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating correctly, and that all connections are secure and insulated. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your vehicle's ECU to stop the motor from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning and hacking and other typical tactics thieves employ to steal vehicles. car stolen with ghost immobiliser works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. This system's unmatched features and discreet design make it a preferred choice for car lovers and security-conscious motorists alike.
It is crucial to follow the steps of installation in order to ensure the correct integration of the Ghost Immobiliser. The best way to begin is to refer to the wiring diagram of your vehicle that serves as a guideline for locating and connecting the wires required. The next step is to determine the power and grounding sources. Once you've located them, you will need to mark the points to make them easily identifiable during installation. It's important to use high-quality materials and tools. Basic hand tools can assist you in making precise connections. A multimeter can verify electrical values and guarantee safety. Insulation tape and cable tie ensure that all connections are neat. Also, a user's guide will provide specific instructions specifically tailored to your Ghost model.
It is essential to test the system prior to installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm that the immobiliser functions according to plan, and prevents unauthorised vehicle start-ups. It is recommended to complete this routinely as part of your routine vehicle inspections to ensure that the system is working properly.
Once the installation is complete, you can drive your vehicle with confidence. The Ghost will safeguard your pride and joy from thieves who might steal your car. It will ensure that no one is able to take your car away without having the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to identify any attempts to tamper with or steal your vehicle and allow you to track your vehicle if it's stolen.
The Ghost is compatible with a variety of vehicles, including those made by all major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines in the installation of our products. This guarantees customers, insurance companies, and law enforcement agencies that installations are performed safely and correctly.